00-2 GPR for Fast Pavement Assessment. Report: L. Liu, “GPR for Fast Pavement Assessment ,”May 2007, JHR 07-310. Final Report (pdf)
00-4 Automated Detection and Analysis of Speed Limit Signs. Report: B. Javidi, M-A Castro, S. Kishk and E. Perez, “Automated Detection and Analysis of Speed Limit Signs,” February, 2002, JHR 02-285. Final Report (pdf)
00-5 Field Monitoring and Evaluation for Sign Support Structures Subject to Dynamic Loads. Report: M. DelGrego, and J. DeWolf, “Field Monitoring and Evaluation for Sign Support Structures Subject to Dynamic Loads,” March 2003, JHR 03-291. Final Report (pdf)
02-1 Incorporating Truck Flows Into the State-wide Planning Traffic Model. Report: Aultman-Hall, L., Guo, F., O’Brien, C., Padlo, P. and Hogge, B., “Incorporating Truck Flows into the State-wide Planning Traffic Model,” November 2004, JHR 04-299. Final Report (pdf)
02-2 Developing a Methodology to Evaluate the Safety of Shared-Use Paths. Report: Aultman-Hall, L. and LaMondia, J., “Developing a Methodology to Evaluate the Safety of Shared-Use Paths: Results from Three Corridors in Connecticut,” June 2004, JHR 04-297. Final Report (pdf)
02-11 Pilot for Automated Detection and Classification of Road Surfaces Degradation Features. Report: Javidi, B., Stephens, J., Kishk, S., Naughton, T., MacDonald, J. and Isaac, A., “Pilot for Automated Detection and Classification of Road Surface Degradation Features,” November 2003, JHR 03-293. Final Report (pdf)
03-2 A Laser-based 3D Data Acquisition System for the Analysis of Pavement Distress and Roughness. Report: Javidi, B., Kim, D. and Kishk, S., “A Laser-based 3D data Acquisition System for the Analysis of Pavement Distress and Roughness,” December 2004, JHR 04-300. Final Report (pdf)
03-5 Factors Affecting Young Driver Safety. Report: Aultman-Hall, L. and Padlo, P., “Factors Affecting Young Driver Safety,” November 2004, JHR 04-298. Final Report (pdf)
03-7 Development of New Rheological Tools for Asphalt Binder and Concrete Characterization. Report: M. Shaw, P. Mather, A. Senador and Y. Patil, “Development of New Rheological Tools for Asphalt Binder and Concrete Characterization.” June, 2006, JHR 06-306. Final Report (pdf)
03-8 Ultrafine Particle Size Distributions of Hybrid-Electric and Particle-Trap Diesel Connecticut Transit Buses. Report: Holmén, B., Chen Z., Davila, A., Gao, O. and Vikara, D., “Particle Matter Emissions from Hybrid Diesel-Electric and Conventional Diesel Transit Buses: Fuel and Aftertreatment Effects.” August, 2005, JHR 05-304. Final Report (pdf), Appendix A (pdf), Appendix B (pdf), Appendix C (pdf), Appendix D (pdf).
04-1 Pavement Crack Sealing – Emulsified vs. Traditional Hot Pour Materials. Report: S. Zinke and J. Mahoney, “Evaluation of Pavement Crack Treatments,” February 2006, JHR 06-305. Final Report (pdf)
04-6 Designing Roads That Guide Drivers to Choose Safer Speeds. Report: J. Ivan, N. Garrick and G. Hanson, “Designing Roads That Guide Drivers to Choose Safer Speeds ,” November 2009, JHR 09-321. Final Report (pdf)
05-6 Value Pricing in Connecticut: A Policy Simulation. Report: N. Garrick, W. Marshall and E. Jackson, “Value Pricing in Connecticut,” September 2008, JHR 08-313. Final Report (pdf)
05-7 Design and Feasibility Study: Connecticut Transportation Planning Data. Report: L. Aultman-Hall, S. Mather, E. Jackson, H.-S. Shin and J. Ivan, “Design and Feasibility Study: Connecticut Transportation Planning Data,” October 2008, JHR 08-315. Final Report (pdf)
05-9 Detailed Modal Analysis of Particulate Emissions from Connecticut Transit Buses for Emissions Modeling. Report: B. Holmén, E. Jackson, D. Sonntag and H.O. Gao, “Detailed Modal Analysis of Particulate Emissions from Connecticut Transit Buses for Local Emissions Modeling,” December 2008, JHR 08-316. Final Report (pdf)
06-3 Extending the Lifespan of Existing Bridges through Controllable Stiffness and Damping Devices. Report: R. Christenson, “Extending the Lefespan of Existing Bridges through Controllable Stiffness and Damping Devices,” December 2008, JHR 08-317. Final Report (pdf)
06-9 Evaluation of Stormwater Quality Associated with Milling of HMA Surfaces. Report: A. MacKay and J. Mahoney, “Evaluation of Stormwater Quality Associated with Milling of HMA Surfaces,” February 2010, JHR 10-322. Final Report (pdf)
06-10 Improving Surveying Accuracy and Efficiency in Connecticut: An Accuracy Assessment of GEOID03 and GEOID09. Report: T. Meyer and R. Baron, “Improving Surveying Accuracy and Efficiency in Connecticut: An Accuracy Assessment of GEOID03 and GEOID09,” July 2010, JHR 10-323. Final Report (pdf)
07-2 Creating Useful Products from Connecticut’s 2000 LIDAR Data Set. Report: T. Meyer, “Creating Useful Products from Connecticut’s 2000 LIDAR Data Set,” October 2008, JHR 08-314. Final Report (pdf) Connecticut LIDAR-derived products download available at https://cteco.uconn.edu/data/lidar/index.htm
07-5 Incorporating Wet Pavement Friction into Traffic Safety Analysis. Report: J. Ivan, N. Ravishanker, E. Jackson, B. Aronov and S. Guo, “Incorporating Wet Pavement Friction into Traffic Safety Analysis,” December 2010, JHR 10-324. Final Report (pdf)
08-5 Assessing and Quantifying Public Transit Access. Report: N. Lownes and S. Mamun, “Assessing and Quantifying Public Transit Access,” March 2014, JHR 14-325. Final Report (pdf)
12-1 Transforming NAD 27 and NAD 83 Positions: Making Legacy Mapping and Surveys GPS Compatible. Report: T. Meyer and R. Baron, “Transforming NAD 27 and NAD 83 Positions: Making Legacy Mapping and Surveys GPS Compatible,” June 2015, JHR 15-327. Final Report (pdf)